Flow State

Sokuro windshield banners are made to compliment and add to your car no matter what style build. The sun strip style banner is a cut out version with kanji reading "Sokuro style". The dimensions of this banner is 60" x 10", there will likely be excess that needs to be trimmed with a utility knife or a box cutter.

-Always prep the surface you are working with, rubbing alcohol works the best however a good wash with water and fully dried can work as well.

-Use the soapy water method while applying this banner.

-Spray top half of your windshield with soapy water.

-Peel the first half of the banner off of the backing paper, and spray adhesive side of banner with soapy water.

-Continue peeling banner off of the backing while spraying the adhesive with soapy water.

-Once banner is fully removed from backing, start by placing the banner down on the windshield and move it around until you have it centered(with the adhesive sprayed with soapy water as well as the windshield, the adhesive will not stick and should move around freely).

-once you are happy with the placement you can take your squeegee, or credit card or something flat(note the vinyl can get scratched from a credit card or other hard edges), and starting from the center of the banner you can squeegee all the soapy water out towards the edges. It is best to start in the middle and work one half at a time.

-Trim excess with a utility knife or box cutter.

-For best results let dry for a minimum of 24hrs to let the adhesive dry and set on the windshield.